1
Ensure that the wall
surface mounting area is clean and dry - free from soap film and residue.
2
Place the adhesive tape tabs (included)
into position on the Dispenser. These are not permanent. They are
to hold the unit only until the silicone adhesive cures.
3
Run a bead of silicone adhesive
(included) down the mounting tracks.
SILICONE
ADHESIVE
STRONG ENOUGH
TO SUPPORT 50 LBS!
4
Press the empty unit firmly into
position on the wall. The silicone adhesive requires a curing time
of 24 hours before you can fill the chambers.
5
Fill the chambers and snap them
into position. Presto! It's ready!
Complete installation instructions are included with every Dispenser!
And if you decide to move, the unit is removable with no wall damage.